پرینتر DP4
پرینتر سه بعدی WANHAO DP4 BLACK CASE
Duplicator 4 is latest 3D Printer from Wanhao.
Excellent 3D Printer with dual extrustion available at a very afordable price.
• Dual Extruder
• ABS & PLA Printing and other materials as well
• 100-Micron layer resolution
• Heated Build platform
• Fully assembled & ready to print
The Duplicator Four is our first dedicated 1.75 mm filament extruder. This extruder was designed from scratch, and contains a number of custom manufactured parts. We’ve learned a lot over our past extruder designs, and incorporated a lot of those lessons here: that’s why it’s smaller, lighter, and faster to build. And since it’s designed from the ground up for 1.75 mm filament, it’s light-years ahead of past designs in small-filament reliability.
The layer alignment is much better which results in nicer prints and higher resolution, 100 micron inch. We’ve completely overhauled the drive system to give the optimum positioning accuracy. The entire system has been upgraded to sturdy 3/8″ diameter linear shafting. This is probably overkill, but you can trust that the axes will be sturdy. We’ve also switched to self-aligning, sintered stainless steel bearings. These are very forgiving to DIY assembly and provide a nice, smooth motion on the steel shafts. We’ve completely replaced the Z axis with a stepper driven, cantilevered stage. Guided by two of the linear shafts, this completely eliminates any Z wobble and results in nicely aligned layers. Using a high-angle lead screw, we were able to increase the speed of the Z axis from 150mm/minute to 1,000mm/minute. This means the layer changes are almost completely imperceptible.
Connect over USB and hit print — the machine will calibrate itself and start printing. The new electronics have been designed to make the printing experience easier than ever. The Duplicator one connects to your computer via a standard USB cable thanks to a USB chip on the motherboard. We’ve also added full end stop support so that you never need to touch the XYZ axes ever again. When you hit print, the machine will automatically home itself, heat up, and begin printing. All you have to do is sit back and relax while your Duplicator three does all the work. Living in the future is awesome. Oh yeah, and the electronics are all inside, so you don’t have wires dangling everywhere.
Or you can print with SD card. Sometimes customer failed in printing with computer USB link, due to the computer sleep or shut down automatically. For this reason, we developed SD card reader on printer. Awesome, all your printer job can be done by this small card. 2G card is sufficient for any 3D file and keep as many file as you like. Simple and fast is our mission.
| Specification | |
| Print Technology | FFF Fused Filament Fabrication |
| Interface | Print with SD Card or direct via USB Port |
| Max Printing Object Size/ Build Volume |
225 * 145 * 150mm, about 5 l |
| Layer Resolution | 0.1mm -0.5mm (100 micron) |
| Positioning Precision | Z-Axis 2.5 micron, XY Axis 11 micron |
| LCD display | 4×20 LCD character display and multi-direction control pad |
| Printing Object Specification | |
| Position resolution | 0.1mm |
| Layer thickness | 0.1mm -0.5mm (100 micron) |
| Extrusion temperature | Recommended Maximum 230 C |
| Platform temperature | Heated Build Platform 120 C Maximum |
| Temperature Sensor | Thermocouple temperature sensors |
| Vertical Printing Speed | 15 Cubic Centi-Meter/ Hour |
| Filament Support | |
| Material Type | Prints ABS, PLA, PET, Nylon, Laywoo-D3, LayBrick, BendLay |
| Color | Wanhao PLA & ABS over 43 colors to choose from |
| Filament size | 1.75+-0.1mm Wire |
| Components Specification | |
| Chassi | DPP – Dense Plastic Plate, very stable and durable |
| Build platform | Heated build plate made of aluminum |
| Stepper Motors | 1.8° step angle with 1/16 micro-stepping |
| XYZ Bearings | Wear-resistant, oil-infused bronze |
| Max temperature | 260°C(500°F) |
| Connectivity | USB, SD Card slot |
| Printer Dimension | 320 x 466 x 382 mm |
| Printer Weight | 12 KG |
| Electric Power Supply | 220V / 110V ( Universal power supply, take IEC cable) |
| Output | 200 W |
| Compliance | GB, CE |
| Warranty | |
| 12 Months warranty – (Normal wearing and consumables not covered). We will provide parts or service on items that proved to be defective. Pls also see our options with extended warranty and support. |
WanHao Duplicator 4 Dual Extruder 3D Printer
desktop 3D printers
| Dimensions | 12.7 x 18.7 x 20.7 inches |
| Heated Pad | 8.9 x 5.7 x 5.9 inch |
| Build quality | Well built and sturdy. |
| Filament | It comes with 2 Rolls of ABS Filament from the colors. |
| Software | ReplicatorG, Python, Pysco, Java and all of the Autodesk software. The open source software ReplicatorG offers the 2GB SD card support and supplies the x3g files. |
| Firmware | It comes up like press the red ‘M’ (Makerbot!) |
| Correct temperature settings | For ABS, the heated filament extruders and the heated platform should be 230/110 deg to get better results, as well as use PLA with 200/100 deg. |
| Level platform | Slowly adjust the platform thumbscrews to make the changes. If it’s too high, the filament will be smeared and scratch the surface. If it’s too low, it is very difficult to stick the filament. |
.
